Sony DSC-P20 User Manual

Page of 88
Ad
di
tiona
l inf
o
rm
atio
n
85
Notes on Using 
Batteries
When operating the camera with size 
AA alkaline batteries, set POWER 
SAVE in the SET UP screen to ON. 
This increases the battery efficiency 
and life when recording still images.
When POWER SAVE is ON
The LCD screen turned off while the 
flash is being charged (while the  /
CHG lamp is flashing*). When the 
camera is turned on for the first time 
after being left unused for a long 
period of time, the flash will take 
longer than usual to charge.
*
If the charging time is short, 
the 
/CHG 
lamp may not be light.
Power save mode
The factory setting is ON (page 66).
Power save mode is also effective 
when using an “InfoLITHIUM” 
battery pack (NP-FS11, not 
supplied), but in this case recording 
can be performed more comfortably 
by setting POWER SAVE in the SET 
UP screen to OFF.
The batteries may be hot 
immediately after using the camera. 
Wait until the batteries have cooled 
before removing them.
Remove the batteries when you will 
not be using the camera for a long 
time.
Do not disassemble batteries, short 
the terminals with metallic objects, or 
place batteries in or near heat 
sources.
Be sure to replace both batteries at 
the same time. In addition, do not 
mix new and old batteries or different 
types of batteries such as alkaline and 
nickel metal hydride batteries.
“InfoLITHIUM” battery pack 
(NP-FS11) (recommended, not 
supplied)
Size AA alkaline batteries (2)
Size AA nickel metal hydride 
batteries (2) (not supplied)
Size AA nickel-cadmium batteries 
(2) (not supplied)
Notes
When using size AA alkaline batteries, we 
recommend Sony Stamina alkaline 
batteries. Other batteries may not bring out 
the full performance of the camera.
When using the camera in low temperature 
environments, use the “InfoLITHIUM” 
battery pack (NP-FS11, not supplied). The 
performance of alkaline batteries drops 
significantly at low temperatures, making 
use impossible.
Nickel metal hydride batteries and nickel-
cadmium batteries can be used, but the 
battery remaining time may not be 
displayed correctly.
Manganese and primary lithium batteries 
cannot be used with the camera.
Power save mode
Handling precautions for size 
AA batteries
Batteries that can be used