Sony DSC-P12 User Manual
13
G
e
tti
ng st
ar
te
d
Using an external power source
,
Open the jack cover and
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
Connect the plug with the v mark facing
up.
up.
•
Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If any trouble
occurs while using the adaptor, immediately
shut off the power by disconnecting the plug
from the wall outlet (wall socket).
wall outlet (wall socket) close by. If any trouble
occurs while using the adaptor, immediately
shut off the power by disconnecting the plug
from the wall outlet (wall socket).
,
Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
•
When you have finished using the AC Adaptor,
disconnect it from the DC IN jack of the
camera.
disconnect it from the DC IN jack of the
camera.
•
The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket) even if the set itself has
been turned off.
source (mains) as long as it is connected to the
wall outlet (wall socket) even if the set itself has
been turned off.
1
Jack cover
AC
Adaptor
Adaptor
DC plug
2
2
To wall outlet
(wall socket)
Power cord
(mains lead)
(mains lead)
1
Using your camera
abroad
abroad
Power sources
You can use your camera in any country or
area with the supplied AC Adaptor within
100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
area with the supplied AC Adaptor within
100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a]
, if necessary, depending on the design of
the wall outlet (wall socket)
[b]
.
•
Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
converter), as this may cause a malfunction.
AC-LS5