Sony DSC-F77A User Manual
10
Charging the battery pack (continued)
Battery life and the number of
images that can be recorded/
viewed
images that can be recorded/
viewed
The tables show approximate guidelines for
the length of time the camera can be used
when you shoot in Normal mode in an
environment where the ambient
temperature is 25°C (77°F), and the
supplied battery pack is fully charged. The
guidelines for the number of images that
can be recorded or viewed allow for
changing the “Memory Stick” as necessary.
Actual results may differ slightly from
these, depending on the conditions of use.
the length of time the camera can be used
when you shoot in Normal mode in an
environment where the ambient
temperature is 25°C (77°F), and the
supplied battery pack is fully charged. The
guidelines for the number of images that
can be recorded or viewed allow for
changing the “Memory Stick” as necessary.
Actual results may differ slightly from
these, depending on the conditions of use.
Shooting still images
In normal shooting
In normal shooting
1)
1) Shooting at 30-second intervals with [P.
QUALITY] set to [FINE], LCD screen turned
on, flashed every two shootings and turned on/
off every ten shootings.
on, flashed every two shootings and turned on/
off every ten shootings.
Viewing still images
2)
2) Playing back images in order at about 3-second
intervals on the single-image screen.
Shooting movies
3)
3) Continuous shooting with an image size of
160×112
•
The battery life and the number of images
recordable or playable are decreased under the
following conditions:
recordable or playable are decreased under the
following conditions:
–
At low temperature.
–
Using the flash.
–
Turning on and off frequently.
–
When [LCD BACKLIGHT] is set to
[BRIGHT]
[BRIGHT]
–
When [POWER SAVE] is set to [OFF].
–
Using the battery pack that was used
repeatedly or the battery capacity decreases
as time passed (page 102).
repeatedly or the battery capacity decreases
as time passed (page 102).
The POWER SAVE function
When the POWER SAVE function is
activated, you can shoot for a longer period
of time.
Set the MODE dial to SET UP, and set
[POWER SAVE] in
activated, you can shoot for a longer period
of time.
Set the MODE dial to SET UP, and set
[POWER SAVE] in
(SETUP 1) to
[ON]. The factory setting is [ON] (page 99).
•
The [POWER SAVE] item is only shown when
using the battery pack.
using the battery pack.
When the POWER SAVE function is
activated
activated
•
The LCD screen will be darker than it is when
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT] at
this time (page 99).
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT] at
this time (page 99).
•
When shooting sill images, the focus works
only while the shutter button is pressed down
halfway.
only while the shutter button is pressed down
halfway.
Image size
NP-FC11 (supplied)
No. of
images
No. of
images
Battery life
(min.)
(min.)
2272×1704
Approx. 170
Approx. 85
Image size
NP-FC11 (supplied)
No. of
images
images
Battery life
(min.)
(min.)
2272×1704
Approx. 3800 Approx. 190
640×480
Approx. 3800 Approx. 190
NP-FC11 (supplied)
LCD screen ON
(min.)
(min.)
LCD screen OFF
(min.)
(min.)
Approx. 90 min
Approx. 120 min