Sony DSC-U10 Manual
76
For Macintosh users
Follow the steps below, according to your OS.
1
Installing the USB driver and
ImageMixer
* For Mac OS 8.5.1, 8.6, or 9.0 users only
1
Turn on your computer, and set the supplied CD-
ROM into the CD-ROM drive.
The “PIXELA ImageMixer” screen appears.
ROM into the CD-ROM drive.
The “PIXELA ImageMixer” screen appears.
2
Double-click
(Setup
Menu).
3
Click
(USB Driver).
The “USB Driver” screen appears.
4
Double-click the icon of the hard disk containing the
OS to open the screen.
OS to open the screen.
5
Drag and drop the following two files from the
screen opened in step 3 into the System Folder icon
in the screen opened in step 4.
• Sony USB Driver
• Sony USB Shim
screen opened in step 3 into the System Folder icon
in the screen opened in step 4.
• Sony USB Driver
• Sony USB Shim
6
When the message for confirmation is shown, click
“OK.”
“OK.”
7
Select the desired language.
8
Follow the instructions on each succeeding screen.
9
Restart your computer and remove the CD-ROM
from the CD-ROM drive.
from the CD-ROM drive.
2
Preparing your camera
For details, see page 67.
3
Connecting your camera to your
computer
For details, see page 68.
Removing the USB cable from your computer or
the “Memory Stick” from your camera during a
USB connection
the “Memory Stick” from your camera during a
USB connection
Drag and drop the drive icon of the “Memory Stick” to
the “Trash” icon, then remove the USB cable or
“Memory Stick.”
the “Trash” icon, then remove the USB cable or
“Memory Stick.”
* If you are using Mac OS X, remove the USB cable, etc., after
you have turned your computer off.
OS
Steps
Mac OS 8.5.1/8.6/9.0
Steps 1 to 5
Mac OS 9.1/9.2/Mac OS X
(v10.0/v10.1)
(v10.0/v10.1)
Steps 2 to 5