Sony DSC-P43 Manual
15
G
e
tti
n
g
st
ar
ar
te
d
•
The number of images and the battery life that
can be recorded/viewed are decreased under the
following conditions:
can be recorded/viewed are decreased under the
following conditions:
–
The surrounding temperature is low
–
The flash is used
–
The camera has been turned on and off many
times
times
–
[LCD Backlight] is set to [Bright] on the
Setup screen
Setup screen
–
[AF Mode] is set to [Monitor]
–
The battery power is low.
Using the AC Adaptor
,
Open the jack cover, then
connect the AC-LS5 AC
Adaptor (not supplied) to the
DC IN jack of the camera.
connect the AC-LS5 AC
Adaptor (not supplied) to the
DC IN jack of the camera.
Connect the plug with the v mark facing
up.
up.
• Be sure to use the AC-LS5 AC Adaptor.
Other AC adaptors cannot be used with
this camera.
this camera.
•
Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If some
trouble occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
(wall socket).
wall outlet (wall socket) close by. If some
trouble occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
(wall socket).
1
AC Adaptor (not
supplied)
supplied)
DC plug
Jack cover
,
Connect the power cord (mains
lead) to the AC Adaptor and to
a wall outlet (wall socket).
lead) to the AC Adaptor and to
a wall outlet (wall socket).
•
When you have finished using the AC Adaptor,
disconnect it from the DC IN jack of the
camera and the wall outlet (wall socket).
disconnect it from the DC IN jack of the
camera and the wall outlet (wall socket).
•
The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket), even if the unit itself
has been turned off.
source (mains) as long as it is connected to the
wall outlet (wall socket), even if the unit itself
has been turned off.
2
2
To a wall outlet
(wall socket)
Power cord
(mains lead)
(mains lead)
1