Sanyo VPC-E2100 User Manual

Using the Setup Menu 

You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.

To go to Setup Menu: 

1. Press Menu button to launch the Record/Playback Menu.
2. Use the

 or 

keys to switch the menu tab to Setup

menu.

3. Use the

 or 

keys to move through the menu

selections.

4. To select an item, press the OK button or 

 key.

5. Change the submenu settings using the 4-way navigation

control.

6. Press the OK button to save and apply settings.

Use the Sound menu functions to control the sounds produced by the camera.

1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the OK button to apply changes.

Sound 1, Sound 2, 
Sound 3, Off

Selects the startup sound when camera is turned on. 

On, Off 

Enables or disables shutter sound when Shutter button is pressed. 
Shutter sound is not available when recording videos or voice clips.

0-4

Adjusts volume.

The Power Save function allows you to set an idle time after 
which the camera automatically sets to sleep mode to save 
power. After a minute of being in sleep mode, the camera 
eventually turns off power. 

This function is not available in the following instances: 

• Recording a video or audio file 
• Playing a slideshow/video/audio file 
• Using the USB connector 

Enable the LCD Save function to automatically decrease the LCD

brightness to conserve battery power. When the camera is idle for
20 seconds, the LCD darkens. Press any button to resume to 
normal brightness.

•

The camera is idle when no buttons are pressed. LCD Save,
though enabled, does not function during video playback, 
slideshow and video recording.

57