Veo 802.11b User Manual

Page 16 of 69 

1. From any PC on the local network, start Internet Explorer and enter the camera’s IP address in the address 
bar, as shown below, then press Enter. For help on determining the camera IP address refer to Section 2.2: 
Getting an IP address. 
 

 

 
2.  The first time you access the camera it will install an ActiveX control on your PC. You should see a dialog like 
the one shown here. If you don’t, your Internet Explorer security settings may prohibit downloading signed 
ActiveX controls. Please restore the default security settings. For help configuring your Internet Explorer security 
settings, see Appendix E: Internet Explorer Security Settings.  

 
 
 

 
 
 
 
 
 
 

 
 

 
3. The camera’s welcome page will appear as shown below. If the welcome page does not appear or Internet 
Explorer shows an error page, refer to the troubleshooting section in Appendix G: Frequently Asked 
Questions, Troubleshooting, and Technical Support. 
 
 

 

 
Note: If the Observer 
ActiveX control is not already 
installed on your PC, you will 
notice that it takes some 
extra time for the page to 
load. The Enter button won’t 
appear until the page 
finishes downloading. 
 

4. Click English to log in to the 
camera.