Veo Infra-Red User Manual

Page of 83
Network Camera User’s Guide 
 74/83 
Appendix C: Bandwidth 
Estimation 
The frame rate of video transmitted from the Network Camera depends on connection 
bandwidth between client and server and quality setting of server. Here is a guideline to 
help you roughly estimate the bandwidth requirements form your Network Camera.   
 
Image bandwidth is approximately equal to the average frame rate in frames per second 
multiplied by the average frame data size in kilobits. Frame data size, or the number of 
bits comprising a single video frame varies a great deal from depending on scene 
complexity, lighting conditions, camera noise, etc. The table shown below is reference 
figures. Actual results generated by the Network Camera may be varying.   
Image Resolution 
Average range of Data Sizes 
176 x 144 (QCIF) 
20 – 40k bit 
320 x 240 (QVGA) 
56– 92k bit   
352 x 288 (CIF) 
64 – 112k bit     
640 x 480 (VGA) 
160 – 320k bit   
 
 
For example, streaming 2 fps of 320 x 240 video requires 112 to 184 kbps (kilobits per 
second). Therefore, with a 128K upload connection; you will typically see 3 to 6 frames 
per second with 176 x 144 resolution and 1 to 2 frames per second with 320 x 240 
resolution without audio stream.   
 
 
Note:
 Audio streaming also takes bandwidth around 32 kbps to 64kbps. 
Most ADSL/Cable modem upload speeds may not even reach up to 128 
kbps. Thus, you may not be able to receive any video while streaming audio 
on a 128 kbps or lower connection. Even though the upload speed is more 
than 128kbps, for optimal video performance, disabling audio streaming will 
get better video performance.