Pentax Optio 330RS User Manual
88
Pla
ybac
k/Er
asing
Installing the software
The procedures for installing the necessary software are
explained.
explained.
• The installation procedure varies depending on the version
of Windows (98/98SE/Me/2000). Before starting installa-
tion, check which version of Windows you have on your
PC. If you are using Windows XP, see “Installing the USB
Driver (Windows XP)” (p.95) for installation instructions.
tion, check which version of Windows you have on your
PC. If you are using Windows XP, see “Installing the USB
Driver (Windows XP)” (p.95) for installation instructions.
• If you are using Windows 2000 or Windows XP
(Professional), log in by the administrator before starting
installation. Refer to your PC’s operation manual for
instructions on how to log in.
installation. Refer to your PC’s operation manual for
instructions on how to log in.
• Either “430RS” or “330RS” will be displayed in the installa-
tion screen area where “xxxxx” is displayed.
Installing the USB driver (Windows 98/98SE/Me/2000)
z
Turn on your PC.
x
Set the included CD-ROM (S-SW5) in the CD-ROM drive.
c
Turn the camera off, and connect the PC and camera
using an USB cable.
using an USB cable.
v
Turn the camera on.
The PC recognizes the camera and the [Add New Hardware
Wizard] screen is displayed.
The PC recognizes the camera and the [Add New Hardware
Wizard] screen is displayed.
Caution