Philips Video Camera User Manual

26

27

CONFIGURATION MENU

LANGUAGE SETUP
HOME FUNCTION SETUP
OSD DISPLAY
VIEW ANGLE SETUP
INITIALIZE DATA
ORIGIN OFFSET
DOME RESET
SYSTEM INFORMATION
EXIT (ESC TO EXIT)

  (Ninth Item of Main menu)

LANGUAGE SETUP

LANGUAGE                     : ENGLISH
SAVE AND EXIT (ESC TO EXIT)

LANGUAGE :                   Select the language you want.
* This setup displays more than 3.0 of the ROM version.

After a dome control menu item has been selected, follow the directions below to set the function.

HOME FUNCTION SETUP

HOME FUNCTION            : NONE
FUNCTION NUMBER        : ---
WATING TIME                  : 120SEC
FUNCTION ENABLE         : OFF
SAVE AND EXIT (ESC TO CANCEL)

HOME FUNCTION :              NONE / PRESET / TOUR / PATTERN / AUTO SCAN
FUNCTION NUMBER :         xxx
WAITING TIME :                  10~240 Seconds
FUNCTION ENABLE :           ON / OFF
                                                            

The Home function can be set so that the camera automatically goes to Preset, Tour, Pattern, Auto Scan after the keyboard controller has been idle for a 
amount of time. For example, if the 

Joystick controller is idle for 10 seconds, the camera goes to preset 1. 

1.  Press 

Menu to display the main menu on the monitor.

2.  Select Home Function by pushing the 

Joystick to the right or to the left to scroll through the None, Tour, Pattern, Auto Scan and Preset functions.

3.   Select Function Number by pushing the 

Joystick down, and push the Joystick to the right or to the left. The executable function number will scroll. 

Each function has maximum numbers. For example, you can have 240 Presets, 8 Tours, 4 Patterns and 8 Auto Scan options.

4.  Select Function Time by pushing the 

Joystick down. Push the Joystick to the right or to the left to select from 10 to 240 seconds.

5.  Select Function Enable by pushing the 

Joystick down. Turn the Home Enable ON or OFF by pushing the Joystick to the right or to the left.