Pentax 10720 User Manual

Page of 100
4
Play
bac
k
54
You can connect the camera to a TV or other device with a video 
input terminal or HDMI input terminal and play back images.
Have a cable according to the terminal of the device to which 
you connect.
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and 
connect the cable to either the PC/AV terminal or 
HDMI terminal.
3
Connect the other end of the cable to the input 
terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode or HDMI mode, and the 
camera information is displayed on the screen of the 
connected AV device.
u
Caution
• When using the video output, images are output at normal 
resolution regardless of the resolution supported by the AV 
device. To output HD video, use the HDMI output or transfer 
to and play back on a computer.
• While the camera is connected to an AV device, nothing is 
displayed on the camera monitor. Also, you cannot adjust the 
volume on the camera. Adjust the volume on the AV device.
• You cannot output both composite and HDMI video signals at 
the same time.
t
Memo
• Check the operating manual of the AV device and select a 
suitable input terminal for connecting the camera.
• If you intend to use the camera continuously for a long period, 
use of the AC adapter kit (optional) is recommended.
• When the hometown is set at the time of initial setting (p.25), 
the video output format is also set in accordance with that 
region. When you set [Time Setting] to [Destination] in [World 
Time] of the 
D
1 menu, the video output setting changes to 
the video output format for that city. Depending on the country 
or region, images may fail to be played back with the set video 
output format. If this happens, change the setting in [Video 
Out] of [Interface Options] in the 
D
2 menu. Refer to “List of 
World Time Cities” (p.82) for video output format for cities that 
can be selected as a hometown or destination.
• By default, the maximum resolution is automatically selected 
to suit the AV device and camera. If it fails to play back 
images properly, change the setting in [HDMI Out] of 
[Interface Options] in the 
D
2 menu.
Connecting the Camera to an AV Device
Terminal of AV Device
Cable Used
Video terminal
AV cable I-AVC7 (optional)
HDMI terminal
HDMI cable with an HDMI terminal 
(Type D) (commercially available)