Philips 220X User Manual

Subject to technical alterations, as well as to changes of the design and the colour

35

All selectors offered below transfer the VGA signal from 2 up to
8 connected computers to a monitor or projector.

2 inputs / 1 output (all HD15 f)

2 select buttons

Auto skip, for skipping non-active inputs

4 status LEDs

Frequency 250 MHz

Supports 1920x1440 pixels and DDC1, DDC2, DDC2B, DDC2B+, DDC2AB

Metal casing 128x75x45 mm

Power supply DC 9V, 300mA

Switches automatically to second input in case of a loss of the original input
signal.

2 VGA inputs / 2 outputs (HD15 f)

2 Audio inputs / 1 output (3.5 mm jack / f)

Loop input = input 1

ID-Bit control

Frequency VGA 300 MHz, Audio 100 kHz

Control: automatic or via contact switch

Metal casing 120x75x25 mm

Power supply 12 V DC, 50 mA

The VGA Matrix connects 2 computers to 2 displays or projectors and also functions
as signal amplifier.
Each output shows either input 1, input 2 or no signal

2 selectable VGA inputs / 2 outputs (all HD15 f)

2 select buttons

4 status LEDs

Frequency 250 MHz

Supports 1920x1440 pixels @ 60 Hz

Metal casing 130x75x42 mm

Power supply DC 7.5 V, 800 mA

similar to 5816-11 but with

4 inputs / 1 output (all HD15 f)

4 select buttons

8 status LEDs

High-quality switcher for VGA and symmetric audio signals. Transforms 3 inputs
into 2 identical outputs.

3 VGA inputs / 2 outputs (HD 15 f)

3 Stereo audio inputs / 2 outputs (5-pin clamp connection)

Frequency VGA 450 MHz, Audio > 100 kHz

Control: 3 select buttons, relais inputs

Metal casing 220x180x45 mm

Power supply 12 V DC, 146 mA

Optional 19" rack adapter

The „central control unit“ for the smaller or medium-sized conference rooms

 Combines 4 switchers in a 2HE 19" casing

 4 : 1 switcher for VGA with Audio, Video with Audio, S-Video with Audio

All Audio connections symmetric with clamps

XLR microphone connection can be adapted to dynamic or condensor microphones

Talk-over function for microphone and volume control for Audio source

Integrated Audio amplifier 2 x 5 W RMS - for smaller conference rooms
a separate amplifier is not necessary

Inputs:
4 VGA (HD15 f), 4 S-Video (4 pin-Mini-Din / f), 4 Video (BNC),
12 Audio (symmetric), 1 microphone (XLR)

Outputs:
1 VGA (HD 15 f), 1 S-Video (4 pin-Mini-Din / f), 1 Video (BNC),
3 Audio (symmetric), 1 Master Audio (symmetric)
Parallel/additional VGA output via Cat5/Twisted Pair - for transmission

  of VGA signals via Cat5-UTP cable up to 100 m (optional receiver

module required)

Operation:
Via buttons on unit, RS 232-/485-/network interface or IR remote control

Control for Audio and microphone level

Frequency 350 MHz (VGA), S-Video (385 MHz), Video / SDI (650 MHz)

Integrated Room Controller for controlling the projector, other signal
sources, screens, lifts or technical devices in the house e.g. light, shades etc.

2 bi-direct RS 232 interfaces

3 infrared (for each 2 diodes)

4 relais

1 Ethernet port

Easy programming via Windows-based software resp. integrated
IR learning module

1 input / 1 output (1 x RJ 45 / f,  HD15 / f)

Frequency 15 MHz @ - 3 dB

Control for level (gain) & EQ (Peaking)

Metal casing 60 x 65 x 25 mm

Power supply DC 12 V, 30mA

8 inputs (HD15 m) / 1 output (HD 15 f)

IR remote control for selection of sources

Buttons on the unit: up/down for  successive selection and blank

16 status LEDs

Supports 2048x1536 pixels @ 60 Hz and DDC, DDC2, DDC2B

Plastic casing 170x190x45 mm

Power supply AC9V, 4.5 W and
1.2 m VGA cable (m / f)