Panasonic DMC-FS7 User Manual

VQT1V73

Preparation

∫ Using an AC adaptor (optional) and a DC coupler (optional) instead of the battery
Ensure that the AC adaptor (DMW-AC5PP;
optional) and DC coupler (DMW-DCC4; optional)
are purchased as a set. Do not use if sold
separately.

1 Open the card/battery door.
2 Insert the DC coupler, being careful of the

direction.

3 Close the card/battery door.

• Ensure that the card/battery door is closed.

4 Open the DC coupler cover A.
5 Plug the AC adaptor into an electrical outlet.
6 Connect the AC adaptor B to the [DC IN] socket

C of the DC coupler.

D Align the marks, and insert.

• Ensure that only the AC adaptor and DC coupler for this

camera are used. Using any other equipment may

cause damage.

Note

• Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional).

• Some tripods cannot be attached when the DC coupler is connected.

• Make sure to unplug the AC adaptor when you open the card/battery door.

• If the AC adaptor and DC coupler are not necessary, then remove them from the digital

camera. Also, please keep the DC coupler cover closed.

• Also read the operating instructions for the AC adaptor and DC coupler.

• For information about optional accessories, refer to the “Digital Camera Accessory System”.

(P110)

About the Built-in Memory/the Card

The following operations can be performed using this unit.

• When a card has not been inserted: Pictures can be recorded in

the built-in memory and played back.

• When a card has been inserted: Pictures can be recorded on the

card and played back.

• When using the built-in memory

(access indication

)

• When using the card

†

(access indication

)

¢ The access indication lights red when pictures are being recorded

on the built-in memory (or the card).





DMC-FS7&FS6PPC-VQT1V73_eng.book 16 ページ２００８年１２月１日　月曜日　午後５時１０分