Panasonic DMC-FX100 User Manual

Preparation

15

VQT1F52

∫ Initial setting
The clock is not set so the following screen 
appears when you turn the camera on.

A [MENU/SET] button
B Cursor buttons
C Mode dial

3/4/2/1 to select the 

A Time at the home area
B Time at the travel destination (P57)

•

2/1: Select the desired item.

•

3/4: Set the display order for the date 
and time.

•

: Cancel without setting the clock.

• Turn the camera off after setting the 

clock. Then set the mode dial to a 
recording mode to turn the camera on 
and check whether or not the clock 
setting is correct.

1 Press [MENU/SET].
2 Press 

3/4 to select [CLOCK SET].

3 Press 

1 and then perform steps 

 and 

 to set the clock.

4 Press [MENU/SET] to close the menu.

• You can also set the clock in the 

[SETUP] menu. (P18)

• When a fully charged battery has been 

inserted for more than 24 hours, charging 
of the built-in battery for the clock is 
completed so the clock setting will be 
stored (in the camera) for at least 
3 months even if the battery is removed. 
(If you insert a battery that is not 
sufficiently charged, the length of time that 
the clock setting is stored may become 
less.) However the clock setting is 
canceled after this time. In this case, set 
the clock again.

• You can set the year from 2000 to 2099. 

The 24-hour system is used.

• If the clock is not set, the correct date 

cannot be printed when you stamp the 
date on the pictures with [DATE STAMP] 
(P82) or order a photo studio to print the 
pictures.

OFF

ON

:
:

DMC-FX100ENG.book  15 ページ  ２００７年５月１６日　水曜日　午後３時２２分