Panasonic DMC-FX500 User Manual

Page of 140
53
VQT1Q36
Advanced (Recording pictures)
[REC] mode: 
³±´²¿
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically recorded in the selected exposure compensation 
range each time the shutter button is pressed. You can select the picture with the desired 
exposure from the 3 pictures with different exposures.
With auto bracket 
d1 EV
Note
When setting auto bracket, [
] appears on the screen.
When taking pictures using auto bracket after setting the exposure compensation range, the 
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower 
left of the screen.
The auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.
When auto bracket is set, the auto review function is activated regardless of the auto review 
setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] 
menu.
The exposure may not be compensated with auto bracket depending on the brightness of the 
subject.
In shutter-priority AE and manual exposure, if the shutter speed is set to longer than 1 second 
auto bracket is disabled.
[Œ] is set for the flash when auto bracket is set.
Burst is canceled when auto bracket is set.
 
1st picture
 
2nd picture
 
3rd picture
d0 EV
j1 EV
i1 EV
Move 
3 [È] until [AUTO BRACKET] 
appears, set the compensation range of the 
exposure with 
2/1.
When you do not use auto bracket, select [OFF] (0).
Press [MENU/SET] to finish.
You can also press the shutter button halfway to finish.
1
2
DMC-FX500P_mst.book  53 ページ  2008年2月25日 月曜日 午後5時54分