Panasonic DMC-FX01 User Manual
Connecting to other equipment
86
VQT0V86
Playing Back Pictures
on a TV Screen
on a TV Screen
∫ Playing back pictures using the AV
cable (supplied)
• Set the aspect of the TV on the camera.
(P21)
• Turn the camera and the TV off.
1 Connect the AV cable A
(supplied) to the [AV OUT] socket
on the camera.
on the camera.
• Connect the AV cable with the [
]
mark facing the [
2] mark on the
[AV OUT] socket.
• Hold the AV cable at
B and insert
straight in or take straight out.
2 Connect the AV cable to the video
input and the audio input sockets
on the TV.
on the TV.
•
1 Yellow: to the video input socket
•
2 White: to the audio input socket
3 Turn the TV on and select external
input.
4 Turn the camera on.
• Do not use any other AV cables except the
supplied one.
• The top and bottom or left and right of the
picture may be cut off slightly when it is
displayed due to the characteristics of the
TV.
displayed due to the characteristics of the
TV.
• Depending on the screen mode setting of
the TV when you connect the camera to a
wide-screen TV or a high-definition TV,
the picture may be stretched horizontally
or vertically and the top and bottom and or
left and right of the picture may be cut off
when it is displayed. In this case, change
the screen mode setting.
wide-screen TV or a high-definition TV,
the picture may be stretched horizontally
or vertically and the top and bottom and or
left and right of the picture may be cut off
when it is displayed. In this case, change
the screen mode setting.
• Audio playback is monaural.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it
• Read the operating instructions for the TV.
• When you play back a picture vertically, it
may be blurry.
• You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set
[VIDEO OUT] in the [SETUP] menu. Even
if you set [VIDEO OUT] to [PAL], the
output signal will still be NTSC in the
recording mode.
or PAL system when you set
[VIDEO OUT] in the [SETUP] menu. Even
if you set [VIDEO OUT] to [PAL], the
output signal will still be NTSC in the
recording mode.
∫ Playing back pictures on a TV with an
SD Memory Card slot
Still pictures recorded on an SD Memory
Card can be played back on a TV with an
SD Memory Card slot.
Card can be played back on a TV with an
SD Memory Card slot.
• Depending on the TV model, pictures may
not be displayed on the full screen.
• Motion pictures cannot be played back. To
play back motion pictures, connect the
camera to the TV with the AV cable
(supplied).
camera to the TV with the AV cable
(supplied).
• You may not be able to play back
MultiMediaCards.
DIGITAL
AV OUT
DC IN
VQT0V86ENG.book 86 ページ ２００６年１月３０日 月曜日 午前９時４６分