Panasonic DMC-FX33 User Manual
Basic
22
VQT1J82
Basic
Taking Pictures
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
speed and the aperture value according to
the brightness of the subject.
• The status indicator
3 lights when you
turn this unit on
2. (It turns off after about
1 second.)
(
(
1: Shutter button)
1 Hold this unit gently with both
hands, keep your arms still at
your side and stand with your feet
slightly apart.
your side and stand with your feet
slightly apart.
A Flash
B AF assist lamp
C When holding the camera vertically
B AF assist lamp
C When holding the camera vertically
2 Aim the AF area at the point you
want to focus on.
3 Press the shutter button halfway
to focus.
• The focus indication
2 lights green and
the AF area
1 turns from white to
green.
(
(
3: Aperture value, 4: Shutter speed)
• The focus range is 50 cm (1.64 feet)
to
¶.
• The subject is not focused in the
following cases.
– The focus indication blinks (green).
– The AF area turns white to red or
– The focus indication blinks (green).
– The AF area turns white to red or
there is no AF area.
– The focus sound beeps 4 times.
• If the distance is beyond the focus
range, the picture may not be properly
focused even if the focus indication
lights.
focused even if the focus indication
lights.
4 Press the halfway pressed
shutter button fully to take a
picture.
picture.
∫ Using the flash
If the camera determines that the place
where the picture is being taken is dark, the
flash is activated when the shutter button is
pressed fully. (When the flash is set to
AUTO [
If the camera determines that the place
where the picture is being taken is dark, the
flash is activated when the shutter button is
pressed fully. (When the flash is set to
AUTO [
]/AUTO/Red-eye reduction
[
]/Slow sync./Red-eye
reduction
.)
• You can switch the flash setting to match
the recording. (P34)
1/30
F2.8
DMC-FX33_ENG.book 22 ページ ２００７年７月９日 月曜日 午後１２時５８分