Panasonic DMC-GF1K User Manual

Page of 196
81
VQT2G62
Advanced (Recording pictures)
¢ When the [ISO LIMIT SET] of [REC] mode menu (P121) is set to anything except [OFF], 
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on 
brightness within a maximum setting of [ISO400].
When setting to [
], ISO sensitivity will adjust automatically depending on brightness 
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
The ISO sensitivity will be set to [AUTO] when recording motion pictures. Also, the 
[ISO LIMIT SET] will not operate.
∫ About [
] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the 
movement of the subject and brightness of the scene to minimise the jitter of the subject.
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously 
changing to match the movement of the subject until the shutter button is pressed fully. Confirm 
the actual shutter speed on the information display for the picture being played back.
Note
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the 
amount of picture noise.
Refer to P62 for the flash range.
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even 
if [
] is selected.
Movements may not be detected when a moving subject is small, when a moving subject is at 
the edge of the screen or when a subject has moved at the very moment when the shutter 
button was pressed fully.
The setting is fixed to [
] in the following cases.
In [SPORTS],[BABY1]/[BABY2] and [PET] in Scene Mode
Programme Shift cannot be activated when the ISO sensitivity is set to [
].
You cannot select [
] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you 
cannot select [AUTO] in Manual Exposure Mode.
To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE 
REDUCTION] in [FILM MODE] towards [_] or setting the items except [NOISE REDUCTION] 
towards [`] to take pictures. (P83)
The camera will not be able to operate with 3/4/2/1 if the [DIRECT AF AREA] (P128) is set 
to [ON]. Set using the Quick Menu (P30).
DMC-GF1GN-VQT2G62_eng.book  81 ページ  2009年8月20日 木曜日 午前11時7分