Panasonic DMC-GF1C User Manual

Page of 204
105
VQT2G44
Advanced (Recording pictures)
Note
The [AF MODE] is automatically set to [Ø] when you switch the recording mode to Motion 
Picture P Mode while the [AF MODE] is set to [
].
ISO sensitivity will be fixed to [AUTO].
[
REC AREA] (P127) is fixed to [
].
[REMAINING DISP.] (P127) is fixed to [REMAINING TIME].
As the aperture is controlled within a certain range to get an adequate exposure in this mode, 
for some cases depending on the brightness of the subject, an actual aperture setting would 
not be changed in response to the movement of selection cursor, so that no change on the 
degree of peripheral defocus could be recognized. (For example, in dark places including in a 
room, the aperture  would stay at the maximum aperture value, even for both ends of the 
selection cursor, so that no change on the degree of peripheral defocus could be recognized.)
Refer to “Recording Motion Picture” on P98 for other settings, operations and information for 
recording motion pictures.
[REC] mode: 
Taking a picture with Face Recognition function
Face Recognition is a function which finds a face resembling a registered face and 
prioritizes focus and exposure automatically. Even if the person is located towards the 
back or on the end of a line in a group photo, the camera can still take a clear picture.
The Face Recognition function includes the following.
In Recording Mode
Display of corresponding name when camera detects a registered 
face
¢
 (if name has been set for the registered face)
The camera will remember a face that has been photograhed many 
times and display the registration screen automatically (if 
[AUTO REGISTRATION] is set to [ON])
In Playback
 Mode
Display of name and age (if information has been registered)
Selective playback of pictures chosen from pictures registered with Face Recognition 
([CATEGORY PLAY] (P132))
¢ Names of up to 3 people are displayed. Precedence for the names displayed when taking 
pictures is determined according to the order of registration.
Note
[FACE RECOG.] only works when [AF MODE] is set to [š].
During the burst mode, [FACE RECOG.] picture information can be attached to only the first picture.
After pressing the shutter halfway down, a different person’s picture information may be added 
when the camera is turned to a different subject to photograph.
You cannot use [FACE RECOG.] in the following scene modes.
[PERIPHERAL DEFOCUS]/[FOOD]/[NIGHT SCENERY]/[ILLUMINATIONS]
When the focus mode is set to [MF], automatic registration is not available.
The data registered with [FACE RECOG.] will be reset when the [REC] menu settings are reset 
with [RESET].
[FACE RECOG.] will find a face similar to the registered face, and does not guarantee secure 
recognition of a person.
Face Recognition may take more time to select and recognize distinctive facial features than 
regular face detection.
To use the Face Recognition function, set the [FACE RECOG.] in the [REC] Mode menu to 
[ON], and register the face images of the people to recognize. (initially set to [OFF])
DMC-GF1KPP-VQT2G44_eng.book  105 ページ  2009年8月17日 月曜日 午後1時19分