Panasonic DMC-GF1C User Manual

VQT2G44

If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.

A 

•

When the camera is connected to the printer, the cable disconnect prohibit icon [å] 
appears. Do not disconnect the USB cable while [å] is displayed.

3/4 to select [PictBridge(PTP)], and then 

•

Do not use any other USB connection cables except the supplied one. Use of cables other than 
the supplied USB connection cable may cause malfunction.

•

Turn the camera off before connecting or disconnecting the AC adaptor (P164).

•

Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.

•

HDMI connection is disabled and connection with the USB connection cable will take priority 
when you connect the USB connection cable while the HDMI mini cable is connected (P147).

•

Motion pictures recorded in [AVCHD Lite] cannot be printed out.

Preparations: Turn on the camera and the printer.

Perform the print quality and other settings at the printer before printing the 
pictures.

A USB connection cable (supplied)

•

Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)

B Align the marks, and insert.
C DC cable (DMW-DCC3; optional)

•

Use a battery with sufficient battery power or the AC adaptor (P164). If the remaining battery 
power becomes low while the camera and the printer are connected, the status indicator blinks 
and the alarm beeps. If this happens during printing, stop printing at once. If not printing, 
disconnect the USB connection cable.

USB MODE

SELECT

SET

PLEASE SELECT 
THE USB MODE

PictBridge(PTP)

PC

DMC-GF1KPP-VQT2G44_eng.book  155 ページ  ２００９年８月１７日　月曜日　午後１時１９分