Panasonic DMC-GF1C User Manual
65
VQT2G44
Advanced (Recording pictures)
[REC] mode:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
brightness between the subject and the background. Look at the following examples.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by
the aperture value and the shutter speed.
the aperture value and the shutter speed.
•
The set exposure value is memorized even if the camera is turned off. However, the exposure
value during the Intelligent Auto Mode is not memorized.
value during the Intelligent Auto Mode is not memorized.
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
subject.
•
Rotate the rear dial slowly but surely.
•
When the aperture and shutter speed values are displayed in the screen in the Program AE
mode, Program Shift operation and Exposure Compensation operation is switched every time
the rear dial is pressed.
mode, Program Shift operation and Exposure Compensation operation is switched every time
the rear dial is pressed.
•
In the Aperture-Priority AE mode, Aperture Setting Operation (P84) and Exposure
Compensation operation is switched every time the rear dial is pressed.
Compensation operation is switched every time the rear dial is pressed.
•
In the Shutter-Priority AE mode, Shutter Speed Setting Operation (P84) and Exposure
Compensation operation is switched every time the rear dial is pressed.
Compensation operation is switched every time the rear dial is pressed.
•
In Quick Menu (P30) in [
] (LCD monitor style), after selecting the Exposure Compensation
display using
2/1 or the rear dial, you can compensate the exposure with 3/4.
•
In Quick Menu in [
] (Finder style), after selecting the Exposure Compensation display using
the rear dial or
2/1, pressing the rear dial or [MENU/SET] will allow you to compensate the
exposure with the rear dial or
2/1.
Under exposed
Properly
exposed
exposed
Overexposed
Compensate the exposure
towards positive.
towards positive.
Compensate the exposure
towards negative.
Press the rear dial to switch to Exposure Compensation operation.
Rotate the rear dial to compensate the
exposure.
exposure.
A Exposure Compensation value
B [EXPO.METER]
B [EXPO.METER]
•
Select [0] to return to the original exposure.
•
Rotate the rear dial to display the [EXPO.METER].
(P125) (However, it does not appear in ñ mode.)
(P125) (However, it does not appear in ñ mode.)
Take a picture.
A
B
DMC-GF1KPP-VQT2G44_eng.book 65 ページ ２００９年８月１７日 月曜日 午後１時１９分