Panasonic KX-TGA573S User Manual

Page of 28
Introduction
6
For assistance, please visit http://www.panasonic.com/phonehelp
For best performance
Avoiding noise
This unit communicates using radio 
waves.
For maximum distance and noise-free 
operation, we recommend placing the 
product away from electrical appliances.
Environment
L
Keep the product away from electrical 
noise generating devices, such as 
fluorescent lamps and motors.
L
The product should be kept free from 
excessive smoke, dust, high 
temperature, and vibration.
L
The product should not be exposed to 
direct sunlight.
L
Do not place heavy objects on top of the 
product.
L
The product should be kept away from 
heat sources such as heaters, kitchen 
stoves, etc. It should not be placed in 
rooms where the temperature is less 
than 5 °C (41 °F) or greater than 40 °C 
(104 °F). Damp basements should also 
be avoided.
L
Operating the product near 5.8 GHz 
electrical appliances may cause 
interference. Move away from the 
electrical appliances.
Routine care
L
Wipe the outer surface of the product 
with a soft moist cloth. Do not use 
benzine, thinner, or any abrasive 
powder.
Conditions for using the cordless 
camera
L
The cordless camera is intended for 
indoor use only. Prolonged exposure to 
direct sunlight or halogen light may 
damage the camera lens.
L
Use the cordless camera in a bright 
place such as under daylight or a well-lit 
room.
L
Do not use the cordless camera in the 
following places:
– near incandescent lamps.
– near any electrical appliance that 
emits a strong radio signal.
– where the subject of the picture is 
against a light source or in front of a 
mirror.
– in places where temperature varies 
greatly, such as near an air 
conditioner or heater.
– any place exposed to oil or steam 
such as a kitchen.
– where an object such as glass can 
cause temperature change due to 
reflection.
L
When using the cordless camera, 
please take into consideration the rights 
of others with regard to privacy.
TGA573(e).book  Page 6  Monday, April 24, 2006  2:05 PM