Panasonic DMC-L10K User Guide

19

VQT1G28

• Charging is completed when the 

[CHARGE] indicator 

A turns off (after 

about 140 minutes).

• Do not use any other AC cables except 

the supplied one.

• After charging is completed, be sure to 

disconnect the AC cable from the 
electrical outlet.

• The battery becomes warm after using it 

and during and after charging. The 
camera also becomes warm during use. 
This is not a malfunction.

• The battery will be exhausted if left for a 

long period of time after being charged. 
Recharge the battery when it is 
exhausted.

• The battery can be charged even if it is 

not fully discharged.

• The battery charger is in the standby 

condition when the AC cable is 
connected. The primary circuit is always 
“live” as long as the power cord is 
connected to an electrical outlet.

∫ Battery indication
The remaining battery power appears on 
the screen.

• The battery indication turns red and blinks. 

(The status indicator blinks when the LCD 
monitor turns off.) Recharge the battery or 
replace it with fully charged battery.
[This does not appear when using the AC 
adaptor. (P128)]

∫ The battery life
The number of recordable pictures 
when using the Viewfinder
(By CIPA standard in program AE mode)

Recording conditions by CIPA standard
• Temperature: 23

oC (73.4 oF)/

Humidity: 50% when LCD monitor is on.

¢

• Using a Panasonic SD Memory Card 

(128 MB).

• Using the supplied battery.
• Using the supplied lens.
• Starting recording 30 seconds after the 

camera is turned on. (When the optical 
image stabilizer function is set to 
[MODE1])

• Recording once every 30 seconds with 

full flash every second recording.

• Turn the camera off every 10 recordings.
¢ The number of recordable pictures 

decreases in Auto power LCD mode or 
Power LCD mode. (P56)

• CIPA is an abbreviation of “Camera & 

Imaging Products Association”.

A

Approx. 450 pictures 
(Approx. 225 min)

VQT1G28ENG_L10KP.book  19 ページ  ２００７年９月６日　木曜日　午前９時２９分