Panasonic DMC-GF2 User Manual

Page of 218
- 37 -
Basic
Applicable modes:
 
Just by touching the subject to focus, it will focus on the subject and take the picture 
automatically.
1
Touch [
] in Recording Mode.
Icon will change to [
], and taking a picture with the 
Touch Shutter function becomes possible.
2
Touch the subject you wish to focus on, and then 
take a picture.
A Rough indication of the area that can be focused with 
the Touch Shutter
AF area with same function as [Ø] in AF Mode is 
displayed at the position you touch, and a picture is 
taken when it is focused. (This function is unavailable at the extreme edges of the screen.)
If the histogram is displayed on top of the subject you want to touch, touch the subject 
after first moving the histogram. 
3
Touch [
] to cancel the Touch Shutter function.
Note
If [FOCUS PRIORITY] is [ON], when the Focus Mode is set to [AFS] and the Touch Shutter 
fails, if the AF area briefly turns red and disappears, this signifies that the picture cannot be 
taken under the current conditions.
When set to [AFC], the picture will not be taken if the focus indication is flashing green, but if 
the subject comes into focus while you are touching the screen, the picture will be taken.
Measurement of brightness is performed on the spot touched when the [METERING MODE] is 
set to [Ù]. 
Taking pictures using the Touch Shutter function
×