Panasonic DMC-GF2 User Manual

Page of 218
Recording
- 98 -
[REC] Mode: 
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure 
enables pictures to be taken even in dark places without the resulting pictures coming out 
dark.
Press 3  (
).
Touch the ISO sensitivity to select.
Touch [SET].
¢ When the [ISO LIMIT SET] of [REC] Mode menu 
 is set to anything except [OFF], 
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
[When the 3D interchangeable lens (optional) is attached, it may become higher than the 
following settings.]
When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on 
brightness within a maximum setting of [ISO400].
When setting to [
], ISO sensitivity will adjust automatically depending on brightness 
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
The ISO sensitivity will be set to [AUTO] (for motion pictures) when recording motion pictures. 
Also, the [ISO LIMIT SET] will not operate.
ISO sensitivity
100
6400
Recording location 
(recommended)
When it is light (outdoors)
When it is dark
Shutter speed
Slow
Fast
Noise
Less
Increased
ISO sensitivity
Settings
AUTO
¢
The ISO sensitivity is automatically adjusted according to the 
brightness.
¢
(Intelligent)
The ISO sensitivity is adjusted according to the movement of 
the subject and the brightness.
100/200/400/800/1600/3200/
6400
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] mode menu 
 is set to [1/3 EV], items of ISO sensitivity that can 
be set will increase.)