Panasonic DMC-FX2GN User Manual
Preparation
14
Inserting/Removing the Card
• Check that the camera is turned off and
that the lens is retracted.
1 Slide the card/battery door to
open it.
• The card and the data may be
damaged if it is inserted or removed
while the camera is on.
while the camera is on.
• We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
SD card with SD Logo.)
2 Insert:
Insert the card with the label side
facing the back of the camera
until it clicks.
facing the back of the camera
until it clicks.
Remove:
Push the card until it clicks, then
pull the card out upright.
Push the card until it clicks, then
pull the card out upright.
• Check the direction of the card.
• Do not touch the connection terminals
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3 1 Close the card/battery door.
2 Slide the card/battery door to
the end and then close it firmly.
• If the card/battery door cannot be
completely closed, remove the card and
insert it again.
insert it again.
FX2_7-GN.book 14 ページ ２００４年８月２日 月曜日 午後３時４０分