Panasonic DMC-FX55 User Manual
Preparation
12
VQT1J59
• The terminals of the charger or the battery
are dirty. In this case, wipe them with a dry
cloth.
cloth.
• When the operating time of the camera
becomes extremely short even after
properly charging the battery, the life of
the battery may have expired. Buy a new
battery.
properly charging the battery, the life of
the battery may have expired. Buy a new
battery.
∫ Charging conditions
• Charge the battery in a temperature
• Charge the battery in a temperature
between 10
oC to 35 oC (50 oF to 95 oF).
(The battery temperature should also be
the same.)
the same.)
• The performance of the battery may
temporarily deteriorate and the operating
time may become shorter in low
temperature conditions (e.g. skiing/
snowboarding).
time may become shorter in low
temperature conditions (e.g. skiing/
snowboarding).
• The battery may swell and its operating
time may become shorter as the number
of times it is charged increases. For long
term battery use, we recommend you do
not frequently charge the battery before it
is exhausted.
of times it is charged increases. For long
term battery use, we recommend you do
not frequently charge the battery before it
is exhausted.
Inserting and
Removing the Card
(optional)/the Battery
Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• Prepare a card. (optional)
• You can record or play back pictures
• Prepare a card. (optional)
• You can record or play back pictures
on the built-in memory when you are
not using a card.
not using a card.
1 Slide the release lever in the
direction of the arrow and open
the card/battery door.
the card/battery door.
• Always use genuine Panasonic
batteries (DMW-BCE10PP).
• If you use other batteries, we cannot
guarantee the quality of this product.
2 Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever
the direction you insert it.
Pull the lever
A in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
B: Do not touch the connection terminals
of the card.
• The card may be damaged if it is not
fully inserted.
3 1:
Close the card/battery door.
2:
Slide the release lever in the
direction of the arrow.
2:
Slide the release lever in the
direction of the arrow.
• If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
check its direction and then insert it
again.
B
A
DMC-FX33_ENG.book 12 ページ ２００７年７月９日 月曜日 午後２時１６分