Panasonic DMC-GH1K User Manual
87
VQT2A61
Advanced (Recording pictures)
•
When setting to [
], ISO sensitivity will adjust automatically depending on brightness
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
•
The maximum ISO sensitivity during motion picture recording is [ISO1600].
•
[
] will operate as [AUTO] while recording a motion picture. Also, [ISO LIMIT SET] is fixed to [OFF].
∫ About [
] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
movement of the subject and brightness of the scene to minimize the jitter of the subject.
•
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
amount of picture noise.
•
Refer to P67 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
if [
] is selected.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The setting is fixed to [
] in the following cases.
–
In [BABY1]/[BABY2] and [PET] in Scene Mode
–
In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in Advanced Scene Mode
SPORTS] in Advanced Scene Mode
•
Program Shift cannot be activated when the ISO sensitivity is set to [
].
•
You cannot select [
] in Shutter-priority AE Mode and Manual Exposure Mode. Also, you
cannot select [AUTO] in Manual Exposure Mode.
•
To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE RED.] in
[FILM MODE] towards [
[FILM MODE] towards [
_] or setting the items except [NOISE RED.] towards [`] to take
pictures. (P88)
•
If you want to set ISO sensitivity and record a motion picture, use the Creative Motion Picture
Mode. (P108)
Mode. (P108)
[REC] mode:
Change tone of the color for the picture to be
taken
taken
(Film Mode)
[You can only select [STANDARD] and [STANDARD] (
) in [
], [¿], [
], [
], [
],
[
] and [
] mode.]
Just as each type of film for film cameras has its own color tone and contrast
characteristics, Film Mode allows you to select up to 9 different “digital films”, color tones,
in the same way as you would select different films for film cameras.
Select different settings in film mode to match the photo look you wish to achieve.
characteristics, Film Mode allows you to select up to 9 different “digital films”, color tones,
in the same way as you would select different films for film cameras.
Select different settings in film mode to match the photo look you wish to achieve.
Press [FILM MODE].
A [FILM MODE] button
DMC-GH1KPP-VQT2A61_eng.book 87 ページ ２００９年４月１４日 火曜日 午後２時４５分