Panasonic PAJ- AJ- P User Manual

– 129 –

Perform the following inspections before shooting to check that all systems are operating prop-
erly. Checking the image with a color monitor is recommended.

Insert a charged battery pack.

Set the POWER switch to ON and check that the HUMID display does not appear and that
five or more bars of the remaining battery level display are lighted.

Á

If the HUMID display appears, wait until the display goes off.

Á

If five or more bars of the remaining battery level display are not lighted, replace the bat-
tery pack with a sufficiently charged battery pack.

Check that there are no cables, etc. around the cassette holder and top panel, and then
press the EJECT button to open the cassette holder.

Check the following items, and then insert a cassette and close the cassette holder.

Á

The cassette is not set to the write protect status.

Á

There is no slack in the tape.

Set the switches as follows.

Iris: AUTO
Zoom: AUTO

WHITE BAL: A or B

OUTPUT: BARS

Gain: Normally, set to 0 dB. When it is too

dark, it is set to the appropriate gain.

VTR SAVE/STBY: STBY