Panasonic WV-CLR920A User Manual

-10-

q Auto Iris Lens Connector

This connector is used to connect the auto iris lens
with a 4-pin male connector supplied as a standard
accessory (Part No. YFE4191J100).

w Flange-back Adjusting Ring (FB)

This ring is used to adjust the back focal length or
picture focus. Rotate this ring upward or downward
for a CS-mount lens. In case of using a C-mount
lens, adjust it with the C-mount adapter.

e Lens (Option)

r Focus Fixing Screw (LOCK)

t Camera Mounting Screw Hole

This hole is used to mount the camera onto a
mounting bracket.

y Down Button (

K)

This button is used to move the cursor downward. It
is also used to select items in the CAM SET UP
menu.

u Right Button (

M)

This button is used to move the cursor to the right.
It is also used to select the mode and can be used
to adjust some levels.

i Left Button (

L)

This button is used to move the cursor to the left. It
is also used to select the mode and can be used to
adjust some levels.

o Up Button (

J)

This button is used to move the cursor upward. It is
also used to select items in the CAM SET UP menu.

!0 Set Button (

I)

This button is used to activate an item selected in
the CAM SET UP menu.

!1 Gen-lock Termination Switch (Hi-Z, G/L 75

Ω)

Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set this
switch to 75 

Ω.

!2 RS-485 Termination Switch (Hi-Z, RS485 LINE

TERM)
This switch is used to terminate of the RS485 termi-
nal. Normally keep it LINE TERM position.

!3 Full duplex/Half duplex Selection Switches 

(4-LINE/2-LINE)
These triple switches are used to select either full
duplex (left side) or half duplex (right side) for the
communication lines.