Panasonic WV-CLR920A User Manual
EXT: Colour picture reverts to black-and-white
when an external DAY/NIGHT switching sig-
nal is received (refer to alarm and DAY/
NIGHT connections).
nal is received (refer to alarm and DAY/
NIGHT connections).
ON: Black and White mode is selected.
OFF: Colour mode is selected.
OFF: Colour mode is selected.
3. Select AUTO1 or AUTO2 using
L or M.
4. Press
I.
The AUTO1 or AUTO2 menu appears on the moni-
tor screen.
tor screen.
-45-
10-5. BW
1. Move the cursor to BW.
2. Select AUTO1, AUTO2, EXT, ON or OFF using
2. Select AUTO1, AUTO2, EXT, ON or OFF using
L
or
M.
Default: OFF
AUTO1: The camera selects black and white mode
AUTO1: The camera selects black and white mode
if the picture is dark, or colour mode if the pic-
ture is bright enough.
Note: Colour picture switches to black-and-
ture is bright enough.
Note: Colour picture switches to black-and-
white picture and vice versa in approxi-
mately 1 or 2 minutes after recognition of
illuminance.
mately 1 or 2 minutes after recognition of
illuminance.
AUTO2: Applying AUTO1 may cause malfunction
when using a source of near-infrared light at
night because the illuminance changes signifi-
cantly when switching between the colour pic-
ture and the black-and-white picture. But
AUTO2 allows the unit to prevent malfunction
because it simply recognizes a source of light.
Note: Because a source of light is simply rec-
night because the illuminance changes signifi-
cantly when switching between the colour pic-
ture and the black-and-white picture. But
AUTO2 allows the unit to prevent malfunction
because it simply recognizes a source of light.
Note: Because a source of light is simply rec-
ognized based on the information from
CCD image pickup element, an object
sometimes can not be recognized suc-
cessfully when the object is always mov-
ing or the object and its background have
the same colour.
When you apply this mode, AUTO2, the
wavelength of the light source should be
800 nm or more.
CCD image pickup element, an object
sometimes can not be recognized suc-
cessfully when the object is always mov-
ing or the object and its background have
the same colour.
When you apply this mode, AUTO2, the
wavelength of the light source should be
800 nm or more.
** SPECIAL **
UP SIDE DOWN OFF
CHROMA GAIN ....I....
AP GAIN ....I....
PEDESTAL ....I....
- +
UP SIDE DOWN OFF
CHROMA GAIN ....I....
AP GAIN ....I....
PEDESTAL ....I....
- +
BW OFF
BURST (BW) ON
CAMERA RESET PUSH SW
RET END
BURST (BW) ON
CAMERA RESET PUSH SW
RET END
** BW AUTO1 **
LEVEL HIGH
DURATION TIME .I..
S L
LEVEL HIGH
DURATION TIME .I..
S L
RET END