Panasonic VQT0W82 User Guide

Connecting to other equipment

100

VQT0W82

• Do not use any other USB connection 

cables except the supplied one.

• Do not disconnect the USB connection 

cable while [ACCESS] is displayed.

• If battery power is exhausted while the 

camera and the PC are communicating, 
the recorded data may be damaged. Use 
a battery with sufficient battery power 
(P19) or the AC adaptor.

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the status indicator blinks 
and the alarm beeps. In this case, stop 
the communication at once on the PC.

• Be careful about the following when 

connecting the camera to a USB 2.0 (High 
Speed) compatible PC.
– Operation is not guaranteed if you are 

connecting 2 or more USB products to a 
PC or connecting the camera with a 
USB Hub or a USB extension cable.

– The camera may not operate normally if 

connected to the USB terminal on the 
keyboard.

• Pictures edited or rotated with a PC may 

be displayed in black in playback mode 
(P44), multi playback (P48) and calendar 
playback (P49).

• For information about this, refer to the 

separate operating instructions for PC 
connection.

• Read the operating instructions for the 

PC.

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to print and start printing on the 
camera’s screen.
Set print settings such as the print quality 
on the printer beforehand. (Read the printer 
operating instructions.)

A: USB connection cable (supplied)
B: AC adaptor (supplied)
• It may take time to print the pictures so 

use a battery with sufficient battery power 
(P19) or the AC Adaptor when you 
connect to a printer.

• Turn the camera off and then insert or 

remove the cable for the AC Adaptor.

B

A

C