Panasonic SDR-H250EB User Manual

LSQT1211

≥ Depending upon the environment of your computer, if it does not support Hi-Speed USB (USB 2.0), 

for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly 
when you play back recorded images.

≥ Set the display resolution to 1024k768 (16 bits colour) or higher.

Select [start] 

# ([Settings] #) [Control Panel] # ([Appearance and Themes] #) [Display] and select 

[Settings] tab, and then adjust [Screen resolution] and [Color quality].

≥ This unit’s USB terminal is read only. It cannot be used to write data to the unit from the computer.

∫ Using Built-in SD Drive

≥ The USB equipment operates with the driver installed as standard in the OS.

∫ Usable discs

The table below lists the types of DVD discs which can be used by the supplied software.

* If a DVD-RAM driver is installed, it may not be possible to use DVD-RAM discs.
≥ Depending on your computer, it may not be possible to use some of the DVD discs listed in the table 

above.

≥ Refer to the operating instructions of your computer for details about the DVD discs which can be 

written to on the computer.

≥ To playback a DVD disc created using ImageMixer3, the player must support playback of that DVD 

disc. (Refer to the operating instructions of the player.)

≥ Use discs made by a trustworthy manufacturer. It may not be possible to record images properly if 

you use low-quality discs.

IBM PC/AT compatible personal computer

Microsoft Windows 2000 Professional
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional

Intel Pentium II 300 MHz or higher

32 MB or more (64 MB or more recommended)

USB 1.1 or later — A type

DVD-R/iR

¥

j

DVD-R DL /iR DL

¥

j

DVD-RW/iRW

¥

¥ (DVD-RW only)

DVD-RAM

j

¥

*

¥: Can be used.

j: Cannot be used.

LSQT1211(PAL_ENG).book  79 ページ  ２００７年２月１３日　火曜日　午後１時１４分