Panasonic DMC-LC43PP User Manual

Page of 104
Others
92
Message Indications
[NO MEMORY CARD]
Insert the Memory Card.
[THIS MEMORY CARD IS 
PROTECTED]
Cancel the Memory Card lock.
[NO VALID IMAGE TO PLAY]
Carry out playback after recording or 
after inserting the Memory Card with a 
recorded image.
[MEMORY CARD FULL]/[NOT 
ENOUGH MEMORY IN THE CARD]
Insert a new Memory Card or delete 
unnecessary data.
[MEMORY CARD ERROR]
Failed access to Memory Card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera [OFF] and remove the 
card. Then insert the card and turn the 
camera back [ON]. Be sure camera is 
[OFF] before removing or inserting the 
card to avoid damaging the card.
[SYSTEM ERROR]
When the camera does not work 
correctly because of the pressure to the 
lens, this message is displayed. Turn 
the power switch to [ON] again.
[PLEASE SET THE CLOCK]
This message is displayed when you 
use the camera for the first time or you 
do not use the camera for a long time.
Set the clock again.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, you 
can delete or overwrite the image.
[THIS PICTURE CAN’T BE 
DELETED]/[SOME PICTURES 
CAN’T BE DELETED]
If the image is not based on the DCF 
standard, it is not possible to delete 
selected pictures.
[NO ADDITIONAL DELETE 
SELECTIONS CAN BE MADE]
You have exceeded the number of 
images that can be set at once with 
multi-deleting setting.
[CAN’T BE SET ON THIS 
PICTURE]/[CAN’T BE SET ON 
SOME PICTURES]
If the image is not based on the DCF 
standard, it is not possible to set the 
DPOF or audio dubbing.
[MEMORY CARD ERROR 
FORMAT THIS CARD?]
The format of this card cannot be 
recognized by the camera. Format the 
card again with the camera.
[MODE DIAL IS NOT IN THE 
PROPER POSITION]
This message is displayed when you 
turn on the camera with the mode dial in 
the wrong position.
Rotate the mode dial to the proper 
position.
KC93-PP.book  92 ページ  2003年3月19日 水曜日 午後2時11分