Panasonic VQT1D44 User Manual

26

VQT1D44

∫ Check the following items 

∫ Pictures cannot be acquired 

Make sure that [Removable Disk] is added 
in [My Computer].

• Drive letters (e.g., H:) may vary 

depending on PC.

If the removable disk is not added, 
perform the following operations.
1 Click [start] >> ([Setup] >>) [Control 

Panel], and double-click [System].

2 Click ([Hardware] >>) [Device 

Manager], and check that [Other 
Devices] is displayed.

3 If [Other Devices] is displayed, delete it.

• If it is not displayed, check the 

connection. (P8) 

4 Return to the original screen, and turn 

off the PC.

5 Disconnect the USB connection cable 

from the PC.

6 Turn on the PC to start it.
7 Install the USB driver again. (For 

Windows 98/98SE only) 

8 Connect the USB connection cable to 

the PC.
• Check that a [Removable Disk] is 

added again. If a [Removable Disk] is 
not added, repeat the above steps.

• When pictures cannot be transferred using the USB connection cable, use the following 

procedures.

When Windows 98/98SE is used, install 
the USB driver (P6), then connect the 
cable.

If the PC in use has two or more USB 
ports, connect the USB connection cable 
to other USB ports in turn.
• If you connect the digital camera to a 

USB port of the PC’s keyboard, normal 
operation may not result.

• If you connect the digital camera using 

a USB hub or USB extension cable, 
normal operation is not guaranteed.

Is there a Card inserted into your digital 
camera? Or, are there pictures on it? 

Are the pictures already transferred to 
the PC?
• You cannot transfer the same pictures 

more than once.

VQT1D44ENG.book  26 ページ  ２００６年１２月１日　金曜日　午後２時１９分