Panasonic DMC-LC70GN User Manual
Playback (advanced)
83
ª Mass Storage
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time you are
The drive appears on the
[My Computer] folder.
• If it is the first time you are
connecting the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
The drive is shown on the screen.
ª PTP
[Windows]
The camera icon appears on the
[My Computer] folder.
• If it is the first time you are
The camera icon appears on the
[My Computer] folder.
• If it is the first time you are
connecting the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then the camera
icon appears on the [My Computer]
folder.
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then the camera
icon appears on the [My Computer]
folder.
[Macintosh]
You can read pictures with image
capture or iPhoto.
You can read pictures with image
capture or iPhoto.
¬Suggestions/Tips ¬
• If the remaining battery power
becomes low during
communication, the power
indicator blinks and the alarm
beeps. In this case, stop the
communication, because the data
may be destroyed. Then turn the
camera off and use the following
power source. (P13)
communication, the power
indicator blinks and the alarm
beeps. In this case, stop the
communication, because the data
may be destroyed. Then turn the
camera off and use the following
power source. (P13)
• New batteries
• Charged batteries
• AC adaptor (optional, DMW-AC2)
• Charged batteries
• AC adaptor (optional, DMW-AC2)
• Refer to P81 carefully when
connecting to the OS except for
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
• The status indicator lights during
communication.
• Do not use any other USB connection
cables except the supplied one.
• When connecting to a PC, we
recommend using the AC adaptor
(optional, DMW-AC2) as the power
source.
(optional, DMW-AC2) as the power
source.
• Refer to the supplementary operating
instructions about connection with a
PC for details.
PC for details.
When setting PTP
• It may take time to display the
• It may take time to display the
communication screen depending on
the PC.
the PC.
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
card or delete them.
• When there are 1000 or more pictures
on the card, the pictures may not be
imported.
imported.
• When the PC recovers from the
standby mode while connecting it to a
camera with USB connection cables,
they may not properly communicate
with each other.
camera with USB connection cables,
they may not properly communicate
with each other.
LC80GN.book 83 ページ ２００４年６月１７日 木曜日 午前１０時１８分