Panasonic DMC-LC50PP User Manual
Recording pictures (advanced)
68
Using the AF Trigger
(DMC-LC80/DMC-LC70)
(DMC-LC80/DMC-LC70)
Prefocus is a technique to focus on the point where the subject comes in advance,
and it is used when taking a picture of the subject with quick motion.
This function is suitable when the distance between the camera and the subject is
certain.
and it is used when taking a picture of the subject with quick motion.
This function is suitable when the distance between the camera and the subject is
certain.
Preparation
• Set the mode dial except for [
• Set the mode dial except for [
]/[
]/[
]. (P29)
1
Select [AF TRIGGER] and set it to
[FOCUS].
[FOCUS].
• Close the menu by pressing
[MENU] button after finishing the
setting.
setting.
2
Aim the AF area to the point
where you want to focus (P30) and
press the [FOCUS] button.
where you want to focus (P30) and
press the [FOCUS] button.
• When the subject is focused, the
AF area turns from white to green
and the focus indication
and the focus indication
1 lights up
for 1 second. If the subject is out of
the focus range, the focus
indication will keep on blinking.
the focus range, the focus
indication will keep on blinking.
• Even when pressing the shutter
button halfway, the focus will not be
changed unless you press the
[FOCUS] button again.
changed unless you press the
[FOCUS] button again.
• When you press the shutter button
halfway, [
] indication
disappears and then the aperture
value and the shutter speed are
displayed.
value and the shutter speed are
displayed.
• When you press the shutter button
halfway without pressing the
[FOCUS] button, the [
[FOCUS] button, the [
]
indication turns to red.
WB
WB
SELECT
SET
EXIT
MENU
REC
2
/
3
SETUP
AF TRIGGER
AUDIO REC.
SHUTTER
D.ZOOM
OFF
FOCUS
OFF
SPOT MODE
OFF
1600
19
AF
FOCUS
AF
FOCUS
AF
FOCUS
DMC-LC80.book 68 ページ ２００４年６月１５日 火曜日 午後５時４９分