Panasonic VQT2Q86 User Manual
Preparation
- 24 -
Inserting and Removing the Card (optional)/the
Battery
Battery
•
Check that this unit is turned off.
•
Confirm that there is no foreign object.
•
We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and
release the lock.
2:Slide the release lever A and open the
card/battery door.
•
Always use genuine Panasonic batteries.
•
If you use other batteries, we cannot guarantee
the quality of this product.
the quality of this product.
Battery: Insert until it is locked by the
lever
lever
C being careful about the direction
you insert it. Pull the lever
C in the
direction of the arrow to remove the
battery.
battery.
Card: Push it fully until it clicks being
careful about the direction you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
careful about the direction you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
D: Do not touch the connection terminals of the
card.
•
The card may be damaged if it is not fully inserted.
Close the card/battery door until it clicks,
and then lock the [LOCK] switch by
sliding it toward [
and then lock the [LOCK] switch by
sliding it toward [
2].
•
If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
closed, remove the card, check its direction and
then insert it again.
•
Confirm that the red part on the
release lever
is not
showing.