Panasonic DMC-LC5PP User Manual
92
Warning Indication
[NO MEMORY CARD]
Insert the memory card.
Insert the memory card.
[THIS MEMORY CARD IS
PROTECTED]
Cancel the memory card lock.
PROTECTED]
Cancel the memory card lock.
[MEMORY CARD DOOR OPEN]
Close the memory card door.
Close the memory card door.
[NO VALID IMAGE TO PLAY]
Carry out playback after recording or
after inserting the memory card
where there is the recorded image.
Carry out playback after recording or
after inserting the memory card
where there is the recorded image.
[MEMORY CARD FULL]
Insert a new memory card or delete
the useless data.
Insert a new memory card or delete
the useless data.
[REMOVE LENS CAP AND PRESS
SET BUTTON]
Remove the lens cap and then press
the [REVIEW/SET] button.
SET BUTTON]
Remove the lens cap and then press
the [REVIEW/SET] button.
[MEMORY CARD ERROR]
Failed access to memory card.
Insert the card again.
Failed access to memory card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Take out the card, or turn the camera
[ON] again after once turning it [OFF].
Or the card may be destroyed.
Data writing error.
Take out the card, or turn the camera
[ON] again after once turning it [OFF].
Or the card may be destroyed.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting,
you can delete or overwrite the
image.
After cancelling the protect setting,
you can delete or overwrite the
image.
[THIS PICTURE CAN’T BE
DELETED] / [SOME PICTURES
CAN’T BE DELETED]
After cancelling the protect setting,
you can delete the image.
DELETED] / [SOME PICTURES
CAN’T BE DELETED]
After cancelling the protect setting,
you can delete the image.
[NUMBER OF PRINT IS OVER]
You have exceeded the number of
images that can be set at once, with
multi deleting, protect and DPOF
settings.
You have exceeded the number of
images that can be set at once, with
multi deleting, protect and DPOF
settings.
[CAN’T BE SET ON THIS PICTURE]
/ [CAN’T BE SET ON SOME
PICTURES]
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.
/ [CAN’T BE SET ON SOME
PICTURES]
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The format of this card cannot be
recognized by the camera. Format
this again with the camera.
FORMAT THIS CARD?]
The format of this card cannot be
recognized by the camera. Format
this again with the camera.