Panasonic DMC-LC33PP User Manual
Technical use
78
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied A/V cable
1, it is possible
to view and play back the recorded images.
[Preparation]
• Turn the camera and the television off.
• Turn the camera and the television off.
1
Connect the A/V cable
1 to the A/V OUT socket of the camera.
2
Connect the A/V cable to the video in and the audio in sockets of the TV.
• Yellow: to the video in socket
• White: to the audio in socket
• White: to the audio in socket
3
Turn the television on and select external input.
4
Turn the camera on and then set the mode dial to playback [
].
• The image is displayed on the television.
ª Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on a TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
When setting [VIDEO OUT] on the menu, you can view images on a TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
NTSC.
• When connecting to a TV, use new batteries or the AC adaptor (optional,
DMW-AC1).
• Do not use any other cables except the supplied one.
• The A/V cable cannot be connected to the “antenna” connection of your television.
• The A/V cable cannot be connected to the “antenna” connection of your television.
Your TV must provide separate audio and video connections for this feature to
operate correctly.
operate correctly.
• Read the TV operating instructions too.
A/V OUT
DC IN
USB
1
2
KC52-PP.book 78 ページ ２００３年３月１３日 木曜日 午後２時２９分