Panasonic VQT0Y69 User Manual

Page of 128
Others
104
VQT0Y69
Message Display
Confirmation messages or error messages 
will be displayed on the screen in some 
cases.
The major messages are described below 
as examples.
[THIS MEMORY CARD IS PROTECTED]
The Write-Protect switch on the SD 
Memory Card and the SDHC Memory Card 
are moved to [LOCK]. Move the switch 
back to unlock it. (P16, 85, 90)
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a 
recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the picture after 
canceling the protect setting. (P84)
[THIS PICTURE CANNOT BE DELETED]/
[SOME PICTURES CANNOT BE 
DELETED]
Pictures not based on the DCF standard 
cannot be deleted. If you want to delete 
some pictures, format the card after saving 
necessary data on a PC etc. (P90)
[NO ADDITIONAL DELETE SELECTIONS 
CAN BE MADE]
You have exceeded the number of pictures 
that can be set at once with 
[MULTI DELETE]. Delete the selected 
pictures and then select [MULTI DELETE] 
again to delete any remaining pictures.
More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]/
[CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF 
standard, the DPOF print cannot be set.
[NOT ENOUGH SPACE ON BUILT-IN 
MEMORY]/[NOT ENOUGH MEMORY IN 
THE CARD] (DMC-FX3)
There is no space left on the built-in 
memory or the card.
• When you copy pictures from the built-in 
memory to the card (batch copy), the 
pictures are copied until the capacity of 
the card becomes full.
[SOME PICTURES CANNOT BE 
COPIED]/
[COPY COULD NOT BE COMPLETED] 
(DMC-FX3)
The following pictures cannot be copied.
• When a picture with the same name as 
the picture to be copied exists in the copy 
destination.
• Files not based on the DCF standard.
Moreover, pictures recorded or edited by 
other equipment may not be copied.
[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?] 
(DMC-FX3)
This message will be displayed when you 
format the built-in memory on the PC or 
remove the batteries without turning the 
camera off. Format the built-in memory on 
the camera again. (P90) The data on the 
built-in memory will be deleted.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The card format cannot be recognized by 
the camera. Format the card again with the 
camera after saving necessary data on a 
PC etc. (P90)
VQT0Y69ENG.book  104 ページ  2006年6月30日 金曜日 午前11時7分