Panasonic DMC-LZ3 User Manual
Preparation
16
VQT0U87
Inserting/Removing
the Batteries
the Batteries
• Check that the camera is turned off and
that the lens is retracted.
• Use oxyride batteries (supplied), alkaline
batteries (optional) or Ni-MH batteries
(optional).
(optional).
1 Slide the battery door to open it.
2 Insert the batteries with the
+
and
-
poles aligned correctly.
3 1 Close the battery door.
2 Slide the battery door to the
end and then close it firmly.
• Select the battery type being used in
[BATTERY TYPE] in the [SETUP] menu.
(P21)
(P21)
• Remove the batteries after use.
• When batteries have been inserted for
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are
removed.
stored in the camera for approximately
3 months even if the batteries are
removed.
• Do not remove the card or the batteries
while the camera accesses the built-in
memory or a card. The data may be
damaged. (P17)
memory or a card. The data may be
damaged. (P17)
• Remove the batteries after the LCD
monitor and the status indicator
(green) turn off. Otherwise, the settings
on the camera may not be stored
properly.
(green) turn off. Otherwise, the settings
on the camera may not be stored
properly.
Inserting/Removing
the Card (Optional)
the Card (Optional)
• Check that the camera is turned off and
that the lens is retracted.
• You can record or play back pictures
on the built-in memory when you are
not using a card. (P17)
not using a card. (P17)
1 Slide the card door to open it.
VQT0U87ENG.book 16 ページ ２００５年１２月２７日 火曜日 午後７時１２分