Panasonic SV-AV25 User Manual
49
Flashing approx. every 1 second
(flashes on approx. 0.5 seconds and off
approx. 0.5 seconds):
≥The SD Video Camera, battery or AC
(flashes on approx. 0.5 seconds and off
approx. 0.5 seconds):
≥The SD Video Camera, battery or AC
adaptor may be defective. Contact your
nearest Panasonic dealer.
nearest Panasonic dealer.
Flashing approx. every 12 seconds
(flashes on approx. 6 seconds and off
approx. 6 seconds):
≥The ambient temperature or that of the
(flashes on approx. 6 seconds and off
approx. 6 seconds):
≥The ambient temperature or that of the
battery itself is too high or too low.
Charging proceeds, but will take a longer
time.
Charging proceeds, but will take a longer
time.
Turning off:
Charging is completed.
≥If the Power Lamp turns off when charging
Charging is completed.
≥If the Power Lamp turns off when charging
is not completed, the AC Adaptor or the
battery is probably defective. Contact your
nearest Panasonic dealer.
battery is probably defective. Contact your
nearest Panasonic dealer.
Notes and Hints
ª Charging the Battery (
l 10)
≥When the Battery Level Indicator
indicates [
], the battery will run
out in a few minutes. Recharge the
battery.
battery.
≥It takes approx. 145 minutes, maximum
for full-charging. (The charging times are
for normal ambient temperature
(77°F (25°C) /60%). If the Battery is
charged at a higher or lower temperature,
the charging time may be longer.)
for normal ambient temperature
(77°F (25°C) /60%). If the Battery is
charged at a higher or lower temperature,
the charging time may be longer.)
≥The capacities of the recording time/
playback time/still picture storage with a
supplied, full-charged battery are as
follows (77°F (25°C) /60%):
supplied, full-charged battery are as
follows (77°F (25°C) /60%):
The times/number of images listed in the
above table are approximate.
≥Be sure to detach the battery after use.
≥If you disconnect the DC Input Lead or the
above table are approximate.
≥Be sure to detach the battery after use.
≥If you disconnect the DC Input Lead or the
AC Main Lead while charging the Battery,
Power Lamp flashes several times and
goes off. For continuing Battery charge,
wait for approx. 1 minute, and then
connect the AC Main Lead and the DC
Input Lead.
Power Lamp flashes several times and
goes off. For continuing Battery charge,
wait for approx. 1 minute, and then
connect the AC Main Lead and the DC
Input Lead.
≥It is recommended to set the battery even
when using the AC adaptor.
≥The main unit becomes hot when it is
being charged or used. This is normal.
≥When removing the battery, take care not
to drop it.
≥When the SD Video Camera is turned on,
do not attach or remove the battery, or
plug the power cord in or out.
plug the power cord in or out.
l 11)
≥While the card access lamp is on, the
following operations should not be
attempted: (Such action will damage the
Memory Card, cause loss of recorded
data and cause the SD Video Camera to
malfunction.)
attempted: (Such action will damage the
Memory Card, cause loss of recorded
data and cause the SD Video Camera to
malfunction.)
-Remove or insert the Memory Card.
-Remove the battery or unplug the power
-Remove the battery or unplug the power
cable.
-Apply vibration or shock.
Number of Recordable Still Pictures
(PICTURE)
(When recording still pictures with
setting the [Picture size] to
[1600 k 1200] and [Quality] to
[1600 k 1200] and [Quality] to
[Normal] every 30 seconds, activating
flash every other recording.)
flash every other recording.)
220 still
pictures
pictures
Maximum Continuous Recording Time
(MPEG4)
120 min.
Maximum Continuous Playback Time
(MPEG4)
150 min.
Maximum Continuous Voice
Recording Time (VOICE)
240 min.
Maximum Continuous Music Playback
Time (AUDIO)
(When the [Power save] function is
activated)
240 min.
AV25PP.book 49 ページ ２００３年１１月２５日 火曜日 午後１２時５分