Panasonic DMC-LS60 User Guide
17
VQT1C63
Preparation
Setting Date/Time (Clock Set)
Set the mode dial to [
].
■ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on,
the following screen appears.
shipped. When you turn the camera on,
the following screen appears.
A
: [MENU/SET] button
B
: Cursor buttons
C
: Mode dial
1 Press [MENU/SET].
2 Press e/r/w/q to select the date.
2 Press e/r/w/q to select the date.
D
: Time at the home area
E
: Time at the travel destination (P57)
•
w/q : Select the desired item.
•
e/r : Set date and time.
•
A
: To cancel without setting the
clock.
3 Press [MENU/SET].
• When you fi nish setting the clock, switch
the camera off, then switch it on in
recording mode to check that the clock is
set correctly.
recording mode to check that the clock is
set correctly.
Changing the clock setting
1
Press [MENU/SET].
2
Press
e/r to select [CLOCK SET]
(P66).
3
Press
q and perform the above steps 2
and
3 for setting.
4
Press [MENU/SET] to close the menu.
• You can set the clock from the setup
menu (P21).
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately 3
months even if the batteries are removed.
stored in the camera for approximately 3
months even if the batteries are removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• Set the date so that the correct date is
printed when you order prints or use the
date stamp (P75).
date stamp (P75).
A
B
C
PLEASE SET THE CLOCK
3
CLOCK SET
MENU
:
.
.
:
.
.
D
E
:
:
:
3
CLOCK SET
SELECT
EXIT
0
SET
CANCEL
M/D/Y
00
JAN
1 2007