Panasonic DMC-LS60 User Guide

VQT1C63

Preparation

■ Display in normal picture mode [

(at the time of purchase)

1 Recording mode
2 Flash mode (P40)

• The fl ash icon turns red when

activating the fl ash and pressing the
shutter button halfway.

3 AF area

• The AF area displayed is bigger than

usual when taking pictures in dark
place.

4 Focus (P25)
5 Picture size (P62)
6 Quality (P62)

Jitter alert indication (P27)

7 Battery indication

• The battery indication turns red and

blinks. (The status indicator blinks
when the LCD monitor is turned off.)
Replace with new batteries or fully
charged Ni-MH batteries.

• It does not appear when using the AC

adaptor (DMW-AC6; optional).

8 Remaining number of recordable

pictures

9 Recording indication
10 Built-in memory

/ Card

(

lights red during accessing.)

• Do not do the following when the

access indication lights.

– Turn the camera off.
– Remove the batteries or the card

(if used).

– Shake or impact the camera.
– Disconnect the AC adaptor

(DMW-AC6; optional). (when
using the AC adaptor)

• Observe the above caution also when

pictures are being read or deleted or
the built-in memory (or the card) is
being formatted (P83).

• The access time for the built-in

memory may be longer than the
access time for a card. (Max. about 7
sec.)

11 Shutter speed (P25)
12 Aperture value (P25)

• If the exposure is not adequate, the

aperture value and the shutter speed
turn red. (They do not turn red when
the fl ash is activated.)

13 Optical image stabilizer (P64)

• For details about other displays, see

page 92.

■ Changing the display

Press [DISPLAY] to change the display.
Choose whether to display information
such as the number of pixels and
possible number of images for recording
while you are shooting. For details, see
page 37.

LCD monitor and changes to the display

5 6

3 4