Panasonic DMC-LS60 User Guide
41
VQT1C63
Advanced-Shooting
*
1
The fl ash is activated twice. The
subject should not move until the
second fl ash is activated.
second fl ash is activated.
■ Available fl ash settings by recording
mode
The available fl ash settings depend on the
recording mode.
(○ : Available, — : Not available, ◎ : Initial
setting)
recording mode.
(○ : Available, — : Not available, ◎ : Initial
setting)
*
2
It becomes Forced ON [
], when the
backlight compensation function is
activated.
activated.
• The fl ash setting may change when you
change the recording mode. Change the
fl ash setting again if necessary.
fl ash setting again if necessary.
• Flash settings are retained even if you
switch the camera off. However, scene
mode fl ash settings return to the factory
settings when you change the scene mode.
mode fl ash settings return to the factory
settings when you change the scene mode.
■ The available fl ash range to take
pictures
ISO
sensitivity
(P61)
Available fl ash range
AUTO
30 cm (0.98 feet) to 4.7 m
(15.42 feet) (Wide)
30 cm (0.98 feet) to 2.6 m
(8.53 feet) (Tele)
ISO100
30 cm (0.98 feet) to 1.8 m
(5.91 feet) (Wide)
30 cm (0.98 feet) to 1.0 m
(3.28 feet) (Tele)
ISO200
40 cm (1.31 feet) to 2.6 m
(8.53 feet) (Wide)
30 cm (0.98 feet) to 1.4 m
(4.59 feet) (Tele)
ISO400
60 cm (1.97 feet) to 3.7 m
(12.14 feet) (Wide)
40 cm (1.31 feet) to 2.1 m
(6.89 feet) (Tele)
ISO800
80 cm (2.62 feet) to 5.3 m
(17.39 feet) (Wide)
60 cm (1.97 feet) to 2.9 m
(9.51 feet) (Tele)
ISO1250
100 cm (3.28 feet) to 5.3 m
(17.39 feet) (Wide)
80 cm (2.62 feet) to 2.9 m
(9.51 feet) (Tele)
• Refer to P107 for the focus range.
• When you use the fl ash when you have
• When you use the fl ash when you have
set ISO sensitivity to [AUTO] or set
ISO LIMIT in Intelligent ISO mode [
ISO LIMIT in Intelligent ISO mode [
]
to anything other than [ISO400], ISO
sensitivity automatically becomes a
maximum of [ISO640] ([ISO400] in the
[BABY1]/[BABY2] or [PET] scene modes
(P47)).
sensitivity automatically becomes a
maximum of [ISO640] ([ISO400] in the
[BABY1]/[BABY2] or [PET] scene modes
(P47)).
• The edges of the picture may appear
dark if you shoot a very close subject with
the fl ash while the zoom lever is close to
the W side. Zoom in slightly if this occurs.
the fl ash while the zoom lever is close to
the W side. Zoom in slightly if this occurs.
*
*
2
2