Panasonic DMC-LS60 User Guide

VQT1C63

• Do not use any other USB connection 

cables except the supplied one.

• While [ACCESS] is being displayed, 

do not disconnect the USB connection 
cable.

• Data transmission takes time when a 

card contains a large number of pictures.

• Motion image fi les in the built-in memory 

or on a card in this unit may not play 
properly on a computer, so upload them 
to your computer for playback.

• If the remaining battery power is 

exhausted during communication, the 
recorded data may be damaged. When 
you connect the camera to the PC, use a 
battery with suffi cient battery power (P24) 
or the AC adaptor (DMW-AC6; optional).

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the status indicator 
blinks and the alarm beeps. In this case, 
stop the communication at once on the 
PC.

• Pictures edited or rotated with a PC may 

be displayed in black in playback mode 
(P34), multi playback (P67) and calendar 
playback (P68).

• Refer to the operating instructions of the 

PC, too.

• If a card is not inserted when the camera 

is connected to the PC, you can edit or 
access the picture data on the built-in 
memory. If a card is inserted, you can 
edit or access the picture data on it.

• You cannot switch between the built-in 

memory and the card while the camera is 
connected to the PC. When you want to 
switch between the built-in memory and 
the card, disconnect the USB connection 
cable, insert (or remove) the card and 
then connect the USB connection cable 
to the PC again.

• When you change the mode dial to print 

mode [

] with the camera connected 

to the PC, [PLEASE RE-CONNECT THE 
PRINTER.] appears on the camera’s 
LCD monitor. Before reconnecting the 
camera to a printer, change the mode 
from [

] to another one and make sure 

that data transmission is not in progress. 
([ACCESS] appears on the camera’s 
LCD monitor while data transmission is in 
progress.)