Panasonic DMC-LS60 User Guide

VQT1C63

■ Playing back pictures with the 

• Set the [TV ASPECT]. (P23)
• Turn the camera and the TV off.

1 Connect the video cable A 

• Connect the video cable with the [

c] 

mark facing the [

q] mark on the [V. OUT] 

socket.

• Hold B and then insert or pull the video 

cable straight.

• Do not use any other Video cables 

except the supplied one.

• The top and bottom or left and right of the 

picture may be cut off slightly when it is 
displayed due to the characteristics of the 
TV.

• Depending on the screen mode setting of 

the TV when you connect the camera to 
a wide-screen TV or a high-defi nition TV, 
the picture may be stretched horizontally 
or vertically and the top and bottom and 
or left and right of the picture may be 
cut off when it is displayed. In this case, 
change the screen mode setting.

• Read the TV operating instructions too.
• Pictures might be slightly blurred if you 

show them vertically on a television.

• You can view pictures on TVs in other 

countries (regions) which use the NTSC 
or PAL system when you set [VIDEO 
OUT] in the [SETUP] menu. Even if you 
set [VIDEO OUT] to [PAL], the output 
signal will still be NTSC in the recording 
mode.

■ Playback pictures on TV with SD 

You can put your SD Memory Card in a 
television with an SD Memory Card slot to 
show still images. 

• Depending on the television, some pictures 

may not take up the whole screen.

• You cannot play motion pictures. To play 

back motion pictures, connect the camera 
to the TV with the video cable (supplied).

• You may be unable to play MultiMedia 

Cards.

A

B