Panasonic DMC-LX1PP User Manual

Page of 136
Playback (advanced)
104
VQT0S19
Playing Back Pictures with a TV Screen
 
n
Playing back pictures with the 
supplied cable
• Turn the camera and the TV off.
• Set the [TV ASPECT]. (P26)
1
Connect the AV cable A 
(supplied) to the [AV OUT] socket 
of the camera.
• Connect the AV cable with the [f] 
mark facing the [w] mark on the [AV OUT] 
socket.
• Hold 
B
 and then insert or pull the AV 
cable straight.
2
Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
• 
1
 Yellow: to the video input socket
• 
2
 White: to the audio input socket
3
Turn the TV on and select external 
input.
4
Turn the camera on and then set 
the mode dial to playback mode 
[
Q
].
• You can display pictures on a TV only 
when the mode dial is set to playback 
mode [Q].
n
Viewing pictures in other countries
When setting [VIDEO OUT] on the menu, 
you can view pictures on a TV in other 
countries (regions) which use the NTSC or 
PAL system.
• Even if you set menu selection for [VIDEO 
OUT] to [PAL], the output signal is still 
NTSC in the recording mode.
n
Playback pictures on TV with SD 
Memory Card slot
You can put your SD Memory Card in a 
television with an SD Memory Card slot to 
show still images. (Depending on the 
television, some pictures may not take up 
the whole screen).
• You cannot play motion pictures. Use the 
included AV cable when playing motion 
pictures. (See left)
• You may be unable to play MultiMedia 
Cards, even if the television has an SD 
Memory Card slot.
• Do not use any other AV cables except 
the supplied one.
• Read the TV operating instructions too.
• Audio playback is in monaural.
• Pictures might be slightly blurred if you 
show them vertically on a television 
(connected with the included AV cable).
A
B
1
2