Panasonic DMCFX12K User Manual

35

VQT1C14

∫ Canceling Power LCD or High angle 

• If you press and hold [LCD MODE] again 

for 1 second the screen shown in step 

 

is displayed. Select [OFF] to cancel Power 
LCD mode or High angle mode.

• High angle mode is also canceled if you 

turn the camera off or power save mode is 
activated.

• The brightness of the pictures displayed 

on the LCD monitor is adjusted when 
Power LCD mode or High angle mode is 
activated. Therefore, some subjects may 
look different on the LCD monitor. 
However, this does not affect the recorded 
pictures.

• The LCD monitor automatically returns to 

normal brightness after 30 seconds when 
recording in Power LCD mode. Press any 
button to make the LCD monitor bright 
again.

• If the screen is difficult to see because of 

light from the sun etc. shining on it, use 
your hand or another object to block the 
light.

• High angle mode is not activated in the 

following cases.
– In simple mode [

]

– In playback mode
– In print mode [

]

– While the menu screen is displayed
– While the review screen is displayed

A: Photo flash
Do not cover it with your fingers or other 
objects.

∫ Switching to the appropriate flash 

Set the flash to match the recording.

1  [ ].

3/4 to select a mode.

• You can also press 

1 [ ] to select.

• For information about flash settings that 

can be selected, refer to “Available flash 
settings by recording mode”. (P36)

• The menu screen disappears after 

about 5 seconds. At this time, the 
selected item is automatically set.

The flash is automatically activated when 
the recording conditions make it necessary.

FLASH

SET

SELECT

AUTO/RED-EYE

FORCED OFF

FORCED FLASH ON

AUTO

VQT1C14ENG.book  35 ページ  ２００６年１２月４日　月曜日　午後１１時０分